PRODUCTS FAMILY

PRODUCTS

MULTI-STATION HYDRAULIC PRESSING MACHINE (NORMAL MOTOR TYPE) RYY-50-20-20-20-30/50

Function introduction

image.png

image.png

(1) Machine will be equipped with two-head uncoiler, straightener, zigzag feeder, circle cutting machine (hydraulic), water cooling chiller, multi-station hydraulic pressing machine, transfer hand, conveyer, etc.
(2) The circle cutting machine is with 800kN hydraulic pressure capacity
(3) Thickness of round steel piece: 0.5~0.8 mm
(4) The pressure of 5 main-hydraulic cylinders: 500 kN, 200 kN, 200 kN, 200 kN, 300/500 kN
(5) The pressure of 5 down-hydraulic cylinders: 200 kN, 120kN, 60 kN, 60 kN, 60 kN
(6) The Max. work-length of moving transom: 1000 mm
(7) The Max. closed height: 1450 mm
(8) The Max. work-length of main-hydraulic cylinders: 600~750mm
(9) The Max. work-length of down-hydraulic cylinders: 250~310 mm
(10) Motor power: circle cutting machine 7.5KW, zigzag feeder 5KW, transfer hand 2.5KW, water cooling chiller about 11KW, multi-station hydraulic pressing machine 67KW (normal motor type) / 77KW (servo motor type)
(11) Air pressure: 0.5 ~ 0.85 Mpa   
(12) The size of filter housing: Max. Ф136mm, Max. height 310mm, production capacity is depending on the filter housing size, for example the housing height 210mm is about 7pcs/min. (normal motor type), about 8pcs/min. (servo motor type).
(13) Mould die material: DC53, SKD11, Cr12MV, YG15        (14) Mould die lifetime: about 500,000 times, then repair.
Two-head uncoiler + zigzag feeder:
(1) Uncoil & feeding width: Max. 800 mm           
(2) Steel raw material ID: Φ450~530mm
(3) Steel raw material OD: Φ1200 mm
(4) Raw material weight: Max. 3000 kg
(5) Swing (left & right) range: Max. 400 mm
(6) Feeding tolerance: 0.1 mm
(7) The two-head uncoiler can be turned round left & right to exchange the steel roll to save the loading time.